FLEA with HDMI Guide to Installation and Operation
Operating Flea
Front panel keys
The front panel keys used in conjunction with the On Screen Display (OSD) allows you to change parameters on the Flea.
Menu
Use the menu to select the noise reduction mode, adjust various settings and view other useful information about your Flea settings.
(See the Technical Tutorial at the end of this guide for technical information and tips on how to set your Flea).
Input Selection
Use the Input Selection function to select between HDMI input 1 and HDMI input 2.
1- Press to access the menu.
2- Press the Up or Down keys to move through the menu and access the Input Selection command.
3- Press to change the selected input. You will get a checker board pattern if no video signal is present at the selected input.
4- The menu will disappear by itself after a few seconds
Status
Use the status function to display the selected input, video format and other complementary information.
1- Press to access the menu.
2- Press the Up or Down keys to move through the menu and access the
command.
3- Press to set Status to on.
4- The menu will disappear by itself after a few seconds.
Download file here
