HP MR4000N HDTV Tuner Users Guide
Introduction
The HP High-Definition Tuner receives digital high-definition and standard definition ATSC broadcasts right off of the air. A digital on-screen guide enables you to conveniently locate your favorite shows using an intuitive interface. DVI output enables the transmission of pure digital signal for the best picture available today. A digital coaxial link is also available, enabling Dolby Digital® audio signals to be sent to an Audio receiver for pure and impressive sound.
What’s in the Box
• HP HDTV Tuner
• Remote control with two AAA batteries
• Component cables
• DVI cable
• Left and right audio cable
• User’s Guide
• Warranty and Support Guide
RF Input (labeled AIR 75 ohm) – Connect an outdoor or indoor antenna.
Monitor Out – Connect composite cables to your TV or monitor. Insert the yellow video cable into the Video connector and the white and red cables into the Audio L and R connectors, respectively.
Component Out – Connect component cables to your TV or monitor. Insert the green, blue, and red video cables into the Y, Pb, and Pr connectors and the white and red cables into the Audio L and R connectors, respectively.
Digital Audio Out – Connect a cable from the digital audio input of your audio receiver.
Resolution Select – Choose a resolution setting that corresponds with the TV or monitor you are using.
- 1080i (interlaced scanning): Use this setting if you have an HDTV-ready 16:9 (wide screen) aspect ratio TV monitor with HDTV-ready component video inputs that can handle the 1080i video output format.
- 720p (progressive scanning): Use this setting for an HDTV-ready 16:9 (wide screen) aspect ratio TV monitor with HDTV-ready component video inputs that can handle the 720p video output format.
- 480p (progressing scanning): Use this setting for a digital-ready 4:3 aspect ratio TV monitor with progressive scan DTV-ready component video inputs that can handle the 480p video output format. The TV monitor may be labeled as “enhanced definition” or “progressive scan.”
- 480i (interlaced scanning): Use this setting for a conventional TV with composite video.
Download file here
