Management Controls
A formal, written quality control program should be established that covers, but not limited to, employee work practices, chemical application procedures, installation processes that comply with manufacturing instructions, plant/tree installation and care, and equipment control. Employees should be trained on what the program is and how it should be applied. The program should be designed to follow the flow of work. You should start with a thorough review of all plans and specifications to ensure all potential exposures are addressed to your satisfaction. Be careful when hiring seasonal workers or contractors for sporadic work such as snow removal. Make sure your company insurance and quality requirements are understood.

….

School of Risk Control Excellence
Courses applicable for the Landscape Lawn Care and Plant Nursery:

• Controlling Equipment Theft – Identifies ways to control equipment theft and mitigate the associated risks

Assembly
Remove the lawnmower from carton.

1. Carefully read and understand all instructions before attempting to assemble mower.
2. Assemble the lower handle on to the deck and insert the coach bolt (F) from the inside out into the square hole and handle. Attach the plastic knob and tighten (E) see diagram.
   Note: There are 2 positions in which you can secure the lower handle, choose the one relevant for the user’s comfort.
3. Affix the upper handle using coach bolt. Attach the plastic knob and tighten.
4. Disconnect the spark plug cap (C) see diagram.
5. Engage the safety stop lever (A) by pushing towards the handlebar. Extend the starter cord to retainer (B) in upper handle.
6. Attach a cable tie around the throttle and blade brake cables (D).

SAFETY Tips: be careful out there
According to the US Consumer Product Safety Commission, more than 60,000 injuries are treated by hospital emergency rooms each year because of unsafe operation of power lawn mowers. Kids under the age of 15 are the most common victims. Regardless of which mower you choose, don’t forget to practice safety. We’ve assembled some guidelines below to help keep you safe while using your equipment:

• Always wear protective eyewear.
• Mow only in daylight, when the grass is dry.
• Check your yard for any debris or objects, such as toys that could pose a hazard if you mowed over them.
• Keep you children and pets out of the mowing area.
• Never let the starter rope snap back when starting a mower.
• Look three to four feet directly ahead of you while mowing.
• Never tilt a mower; always keep all four wheels on ground.

General Information
1.1 Features
The TM-U220 is a POS printer that can print receipt paper (paper roll). The TM-U220 is designed to be compatible with existing systems built around a TM-U210.

1.1.1 General

• Compact and lightweight.
• 3 model types are provided. (See “Printer types” (page 1-2))
• Excellent reliability and long life due to adoption of a stepping motor both for moving the carriage and for paper feeding.
• Can be installed hanging on the wall with an optional hanging bracket (only for type B, D).

1.1.2 Printer handling

• Easy drop-in paper loading and easy maintenance
• Cable connectors are housed in the bottom of the printer.
• Built-in two drawer kickout interface connectors
• Built-in autocutter (for type A or B)
• Built-in take-up device (for type A)

1.1.3 Printing

• High-speed printing through logic-seeking control
• Two-color printing (black and red)

Introduction
The HP High-Definition Tuner receives digital high-definition and standard definition ATSC broadcasts right off of the air. A digital on-screen guide enables you to conveniently locate your favorite shows using an intuitive interface. DVI output enables the transmission of pure digital signal for the best picture available today. A digital coaxial link is also available, enabling Dolby Digital® audio signals to be sent to an Audio receiver for pure and impressive sound.

What’s in the Box
• HP HDTV Tuner
• Remote control with two AAA batteries
• Component cables
• DVI cable
• Left and right audio cable
• User’s Guide
• Warranty and Support Guide

SM-3S

SM-3S Application:

• Many Suzuki motorcycles
• Some Kawasaki models
• BMW 650CS, Victory Vegas

NOTES!

1. The attached Ground wire MUST BE secured to a good chassis ground. If necessary slit open the ring and spread it out as a lug connector for larger bolts.
2. If you replace incandescent bulbs with LED clusters, refer to the notes in Running Light Conversion section.

SM-3S INSTALLATION:

On most models, access to the turn signal flasher is possible simply by removing the seat and locating it within the wiring harness underneath.

On some models, it is located inside the front fairing. If in doubt, turn it on and follow the clicking sound to locate it.

Refer to your bike’s Manual, or the Wiring Diagram to find its location.

TO INCREASE TIME, after which the signalMinder will stop flashing:

1. Make sure the power is turned OFF.