Step 1. Preparation

1. Prepare the site before beginning the installation. See Chapter 2, “Site Preparation” in the MIP 5000 VoIP Radio Console Installation and Configuration Manual. Important: Make sure there is a network access port in each location where a MIP 5000 Gateway is to be installed. An additional port is recommended for use by service personnel.
2. If required, install the electronics equipment shelves intended to hold the MIP 5000 Gateway units.
3. Consult with the network administrator to determine whether the network uses static or dynamic IP addressing.
   • If static, IP addresses are used to identify gateways and consoles.
   • If dynamic, Host Names are used to identify gateways and consoles.
4. Collect the MAC address of each MIP 5000 Gateway to be installed. Use a photocopy of the Discovery Form on the back of this guide to make a list that identifies which MIP 5000 Gateway is for which radio channel and what the MAC address is.
   • The MAC address (physical address) of each MIP 5000 Gateway appears on a label on the bottom of the unit.

1. Introduction

The DPH-50U USB Phone Adapter for SKYPE is an exciting new device that let’s you make and receive SkypeTM calls using your standard telephone handset. After you follow the simple installation you will be able to do the following:

• Continue to make and receive regular calls as you normally do
• Make and receive SkypeTM calls using your standard telephone
• Forward SkypeTM calls to your mobile phone
• Make SkypeTM calls from your mobile phone even when you are away from your computer
• Switch between a SkypeTM call and a regular phone call

2. Package Contents

The DPH-50U package includes the following (note that your particular hardware and cables may look slightly different than shown below).

1. DPH-50U
2. USB Cable
3. Telephone Cable
4. CD ROM

3. Requirements

In order to install the DPH-50U USB Phone Adapter for SKYPE you will need the following:

Introduction

This manual will describe how to use our Custom CSS system to customize your payment and subscription forms that are hosted on LitePay.com Both payments and subscriptions send the user to litepay.com from your site. Sometimes
this can be distracting for a user to come to a new site. Using CSS is a great way to make our siste, look like your site. This will help eliminate confusion for your customers.

CSS, and Beginers Guide

CSS, or cascading style sheets, is a method of scripting advanced display techniques for use in an html parsing environment. CSS is widely used on almost all sites on the internet and allows a wide range of customization.

Introduction

This guide will provide you with a basic understanding of HTML, XHTML, and CSS. It will also introduce you to Dreamweaver, an editing tool used to create Web pages. You do not need to have prior knowledge of any of the markup languages or Dreamweaver in order to use this guide. However, if you have had some exposure to HTML, you already have a tremendous head start because the language of XHTML is the same as HTML, with the exception of a few rules that must be followed to create a valid XHTML document.

While this guide describes some of the HTML/XHTML tags that you will use most often, it is not meant to be a reference guide. At the end of the guide is a list of resources, some of which are meant to serve as references for the markup languages we will be exploring. The goal here is to get you started on the basics of how use these tools so you can extend your knowledge of them as far as you would like.

Contents At A Glance

1. Apache Ant User Manual Authors (p.9)
2. Feedback and Troubleshooting (p.10)
3. Introduction (p.11)
4. Installing Ant (p.12)
5. Running Ant (p.18)
6. Using Ant (p.23)
7. Concepts (p.30)
8. Listeners & Loggers (p.86)
9. Ant in Anger (Using Apache Ant in a Production Development System) (p.90)
10. Apache Ant Task Design Guidelines (p.102)
11. Writing Your Own Task (p.108)
12. Tasks Designed for Extension (p.114)
13. InputHandler (p.115)
14. Using Ant Tasks Outside of Ant (p.116)
15. Tutorial: Writing Tasks (p.118)
16. License (p.130)

Introduction

This is the manual for version 1.6.0 of Apache Ant. If your version of Ant (as verified with ant -version) is older or newer than this version then this is not the correct manual set. Please use the documentation appropriate to your current version. Also, if you are using a version older than the most recent release, we recommend an upgrade to fix bugs as well as provide new functionality.

INTRODUCTION

This book is designed to bridge the gap between the many PHP and the many Oracle texts available. It shows how to use the PHP scripting language with the Oracle database, from installation to using them efficiently.

The installation and database discussion in this book highlights the Oracle Database 10g Express Edition, but everything covered in this book also applies to the other editions of the Oracle database, including Oracle Database 11g. The PHP you write for Oracle Database 10g Express Edition can be run, without change, against all editions of the Oracle database as well.

The book contains much unique material on PHP’s Oracle OCI8 and PDO_OCI extensions. It also incorporates several updated installation guides previously published on the Oracle Technology Network web site. The chapter on globalization is derived from the Oracle Database Express Edition 2 Day Plus PHP Developer Guide. Sue Harper contributed the chapter on SQL Developer. The chapter on PHP Scalability and High Availability is derived from the Oracle whitepaper, PHP Scalability and High Availability, April 2008.