signalMinder Automatic Cancelation Instalation Guide
SM-3S
SM-3S Application:
- Many Suzuki motorcycles
- Some Kawasaki models
- BMW 650CS, Victory Vegas
NOTES!
- The attached Ground wire MUST BE secured to a good chassis ground. If necessary slit open the ring and spread it out as a lug connector for larger bolts.
- If you replace incandescent bulbs with LED clusters, refer to the notes in Running Light Conversion section.
SM-3S INSTALLATION:
On most models, access to the turn signal flasher is possible simply by removing the seat and locating it within the wiring harness underneath.
On some models, it is located inside the front fairing. If in doubt, turn it on and follow the clicking sound to locate it.
Refer to your bike’s Manual, or the Wiring Diagram to find its location.
TO INCREASE TIME, after which the signalMinder will stop flashing:
- Make sure the power is turned OFF.
- Set the time-out by appropriate selection of the DIP switch
To install other optional features, please refer to:
- Optional Hook-ups section
- Special Features and Functions
- VL-10 vectraLIGHT plug-in ports
The 4-Way flash or Test Mode flash features are not enabled unless the Running Light Option is hooked-up.
After hook-up, you can turn the Running Lights Off with DIP switch
Download file here
