Sony Digital Video Camera Recorder Operating Guide
Step 1: Checking supplied items
Make sure that you have the following items supplied with your camcorder. The number in the parentheses indicates the number of that item supplied.
- AC Adaptor (1) (p.11)
- Power cord (1) (p.11)
- Handycam Station (1) (p.11)
- A/V connecting cable (1) (p.25)
- USB cable (1) (p.27)
- Wireless Remote Commander (1) (except for DCR-SR42)
- Rechargeable battery pack NP-FH40 (1) (p.11) (DCR-SR42/SR62/SR82), NP-FH60 (1) (p.11) (DCR-SR200/SR300)
- CD-ROM Handycam Application Software (1) (p.26)
- Operating Guide (This manual) (1)
Step 2: Charging the battery pack
- Attach the battery pack by sliding it in the direction of the arrow until it clicks.
- Turn the POWER switch in the direction of the arrow to OFF (CHG) (The default setting).
- Connect the AC Adaptor to the DC IN jack on the Handycam Station. Be sure that the v mark on the DC plug is facing up.
- Connect the power cord to the AC Adaptor and the wall outlet.
- Set the camcorder onto the Handycam Station securely. The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off when the battery pack is fully charged. Remove the camcorder from the Handycam Station.
To remove the battery pack. Turn the POWER switch to OFF (CHG). Slide the BATT (battery) release lever and remove the battery pack.
Right-click here to download PDF version
Incoming Search Terms : sony video camera dcr-sr46 operating guide
